boating-forum.com
Promoting boating and boat discussion.

Main
Date: 28 Jul 2005 16:50:30
From:
Subject: Factory Rapids ?

Hello All,

Excuse my ignorance. But, just what the heck are factory rapids?

Any input is appreciated.
-Felder





 
Date: 01 Aug 2005 07:50:04
From: Oci-One Kanubi
Subject: Re: Factory Rapids ?
Tom McCloud wrote:
> On 29 Jul 2005 07:45:13 -0700, "Oci-One Kanubi"
> <rhopley@earthlink.net> wrote:
> >Bin on over 1,000 whitewater trips and never encountered a "factory"
> >rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
> >and Ouella Mill, and there is one in Maine named Cribworks.
>
> Au Contraire', Oci,
>
> River left, below Bull Falls, but above Harpers Ferry -
> File Factory Rapid! But that was back in your novice paddling
> days, a long time ago. Perhaps the memory slips. Tom McCloud


McCloud? McCloud? Do I know you?

-Richard, His Kanubic Travesty
--
======================================================================
Richard Hopley . . . . . . . . . . . . . . . .. Winston-Salem, NC, USA
. . . Nothing really matters except Boats, Sex, and Rock'n'Roll . . ..
rhopley[at]earthlink[dot]net . . . . . . . . . .. cell: (301) 775-0471
. OK, OK; computer programming for scientific research also matters ..
rhopley[at]wfubmc[dot]edu . . . . . . . . . . . office: (336) 713-5077
======================================================================



 
Date: 01 Aug 2005 07:47:29
From: Oci-One Kanubi
Subject: Re: Factory Rapids ?
Hey, John, good to hear from you!

-Richard



John Kobak wrote:
> Hi OC1,
>
>
> I've run "Factory Rapids".
>
> This one is in Ohio. Kokosing River. Class II just downstream of Gambier,
> OH.
>
> John - Keelhauler - Kobak
>
>
> "Oci-One Kanubi" <rhopley@earthlink.net> wrote in message
> news:1122648313.847358.316790@g47g2000cwa.googlegroups.com...
> > Any context is helpful.
> >
> > Bin on over 1,000 whitewater trips and never encountered a "factory"
> > rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
> > and Ouella Mill, and there is one in Maine named Cribworks.
> >
> > IOW, best I can guess is that "factory" is part of the name given to a
> > rapid, but, with no context, how can anyone guess?
> >
> >
> > -Richard, His Kanubic Travesty
> > --
> > ======================================================================
> > Richard Hopley Winston-Salem, NC, USA
> > . rhopley[at]earthlink[dot]net
> > . Nothing really matters except Boats, Sex, and Rock'n'Roll
> > . rhopley[at]wfubmc[dot]edu
> > . OK, OK; computer programming for scientific research also matters
> > ======================================================================
> >
> >
> > felderbush001@yahoo.com wrote:
> > > Hello All,
> > >
> > > Excuse my ignorance. But, just what the heck are factory rapids?
> > >
> > > Any input is appreciated.
> > > -Felder
> >



 
Date: 29 Jul 2005 07:45:13
From: Oci-One Kanubi
Subject: Re: Factory Rapids ?
Any context is helpful.

Bin on over 1,000 whitewater trips and never encountered a "factory"
rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
and Ouella Mill, and there is one in Maine named Cribworks.

IOW, best I can guess is that "factory" is part of the name given to a
rapid, but, with no context, how can anyone guess?


-Richard, His Kanubic Travesty
--
======================================================================
Richard Hopley Winston-Salem, NC, USA
. rhopley[at]earthlink[dot]net
. Nothing really matters except Boats, Sex, and Rock'n'Roll
. rhopley[at]wfubmc[dot]edu
. OK, OK; computer programming for scientific research also matters
======================================================================


felderbush001@yahoo.com wrote:
> Hello All,
>
> Excuse my ignorance. But, just what the heck are factory rapids?
>
> Any input is appreciated.
> -Felder



  
Date: 04 Aug 2005 00:07:51
From: Jim Cavo
Subject: Re: Factory Rapids ?
Richard, I beleive you have run one. The first rapid on the Deerfield
(Mass.) Dryway is factory rapid.
-Jim

Oci-One Kanubi wrote:
> Any context is helpful.
>
> Bin on over 1,000 whitewater trips and never encountered a "factory"
> rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
> and Ouella Mill, and there is one in Maine named Cribworks.
>
> IOW, best I can guess is that "factory" is part of the name given to a
> rapid, but, with no context, how can anyone guess?
>
>
> -Richard, His Kanubic Travesty
> --
> ======================================================================
> Richard Hopley Winston-Salem, NC, USA
> . rhopley[at]earthlink[dot]net
> . Nothing really matters except Boats, Sex, and Rock'n'Roll
> . rhopley[at]wfubmc[dot]edu
> . OK, OK; computer programming for scientific research also matters
> ======================================================================
>
>
> felderbush001@yahoo.com wrote:
>
>>Hello All,
>>
>>Excuse my ignorance. But, just what the heck are factory rapids?
>>
>>Any input is appreciated.
>>-Felder
>
>



  
Date: 30 Jul 2005 17:19:17
From: Steve Cramer
Subject: Re: Factory Rapids ?
There is a place called Factory Shoals on the Alcovy River east of
Atlanta. Great big Class III playground in the middle of a Class I-II
stream. Did I say middle? Maybe used to be, now it's just above where
the Alcovy becomes Jackson Lake. Also Factory Rapid on the Deerfield;
runs next to a...aww, you guessed. Also on the Kokosing in Ohio.

But to be honest, I think the OP was asking about a category of rapids,
not a particular one, and I've never hear of a "factory rapid."

Steve

Oci-One Kanubi wrote:

> Any context is helpful.
>
> Bin on over 1,000 whitewater trips and never encountered a "factory"
> rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
> and Ouella Mill, and there is one in Maine named Cribworks.
>
> IOW, best I can guess is that "factory" is part of the name given to a
> rapid, but, with no context, how can anyone guess?
>
> felderbush001@yahoo.com wrote:
>
>>Hello All,
>>
>>Excuse my ignorance. But, just what the heck are factory rapids?
>>
>>Any input is appreciated.
>>-Felder
>
>


--
Steve Cramer
Athens, GA


   
Date: 30 Jul 2005 18:53:02
From: John Peterson
Subject: Re: Factory Rapids ?
Here you go - it's in MA:

http://www.americanwhitewater.org/photos/?photoid=11300


  
Date: 30 Jul 2005 14:48:57
From: Keelhauler
Subject: Re: Factory Rapids ?
I found a picture of it on AW's photo page.

http://www.americanwhitewater.org/photos/?photoid=949


"Oci-One Kanubi" <rhopley@earthlink.net > wrote in message
news:1122648313.847358.316790@g47g2000cwa.googlegroups.com...
> Any context is helpful.
>
> Bin on over 1,000 whitewater trips and never encountered a "factory"
> rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
> and Ouella Mill, and there is one in Maine named Cribworks.
>
> IOW, best I can guess is that "factory" is part of the name given to a
> rapid, but, with no context, how can anyone guess?
>
>
> -Richard, His Kanubic Travesty
> --
> ======================================================================
> Richard Hopley Winston-Salem, NC, USA
> . rhopley[at]earthlink[dot]net
> . Nothing really matters except Boats, Sex, and Rock'n'Roll
> . rhopley[at]wfubmc[dot]edu
> . OK, OK; computer programming for scientific research also matters
> ======================================================================
>
>
> felderbush001@yahoo.com wrote:
>> Hello All,
>>
>> Excuse my ignorance. But, just what the heck are factory rapids?
>>
>> Any input is appreciated.
>> -Felder
>




  
Date: 29 Jul 2005 22:48:03
From: Tom McCloud
Subject: Re: Factory Rapids ?
On 29 Jul 2005 07:45:13 -0700, "Oci-One Kanubi"
<rhopley@earthlink.net > wrote:
>Bin on over 1,000 whitewater trips and never encountered a "factory"
>rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
>and Ouella Mill, and there is one in Maine named Cribworks.

Au Contraire', Oci,

River left, below Bull Falls, but above Harpers Ferry -
File Factory Rapid! But that was back in your novice paddling
days, a long time ago. Perhaps the memory slips. Tom McCloud





  
Date: 29 Jul 2005 13:06:07
From: John Kobak
Subject: Re: Factory Rapids ?
Hi OC1,


I've run "Factory Rapids".

This one is in Ohio. Kokosing River. Class II just downstream of Gambier,
OH.

John - Keelhauler - Kobak


"Oci-One Kanubi" <rhopley@earthlink.net > wrote in message
news:1122648313.847358.316790@g47g2000cwa.googlegroups.com...
> Any context is helpful.
>
> Bin on over 1,000 whitewater trips and never encountered a "factory"
> rapid, though I've run rapids named Iron Ring, Mill Rapid, Savage Mill,
> and Ouella Mill, and there is one in Maine named Cribworks.
>
> IOW, best I can guess is that "factory" is part of the name given to a
> rapid, but, with no context, how can anyone guess?
>
>
> -Richard, His Kanubic Travesty
> --
> ======================================================================
> Richard Hopley Winston-Salem, NC, USA
> . rhopley[at]earthlink[dot]net
> . Nothing really matters except Boats, Sex, and Rock'n'Roll
> . rhopley[at]wfubmc[dot]edu
> . OK, OK; computer programming for scientific research also matters
> ======================================================================
>
>
> felderbush001@yahoo.com wrote:
> > Hello All,
> >
> > Excuse my ignorance. But, just what the heck are factory rapids?
> >
> > Any input is appreciated.
> > -Felder
>




 
Date: 29 Jul 2005 06:30:11
From: simcoxk@yahoo.com
Subject: Re: Factory Rapids ?
Well, I'm more of a recreational kayaker, not a whitewater kayaker, but
if I'm not mistaken, factory rapids are those that are controllable.
Horrible definition, I know, but that's the best I can do. The first
thing that comes to mind is the kayaking event in the Olympics last
year. Those "rapids" were man-made, so to speak, not from rocks in a
river. Someone out there who does whitewater......help!!! I think I
nailed it, but not quite sure. :-) ~Kathy




felderbush001@yahoo.com wrote:
> Hello All,
>
> Excuse my ignorance. But, just what the heck are factory rapids?
>
> Any input is appreciated.
> -Felder